POWERCOM AMERICA, INC. PM33V14I (CIRRUS LOGIC) Card Type Modem (asynchronous) Chipset Cirrus Logic I/O Options Voice, microphone in, speaker out Maximum Data Rate 33.6Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Fax Modulation Unidentified Error Correction/Compression MNP5, V.42, V.42bis Fax Class Unidentified Data Bus 8-bit ISA Card Size Full height, one-third length [Image] CONNECTIONS Function Label Function Label Telephone line in CN1 Speaker out CN3 Telephone line out CN2 Microphone in CN4 USER CONFIGURABLE SETTINGS Setting Label Position Factory configured - do not alter J8 Unidentified Factory configured - do not alter J9 Unidentified Factory configured - do not alter J10 Unidentified Factory configured - do not alter J11 Unidentified Factory configured - do not alter J12 Unidentified Factory configured - do not alter J13 Unidentified Factory configured - do not alter J14 Unidentified SERIAL PORT ADDRESS SELECTION Setting J1 J2 J3 J4 3F8h (COM1:) Closed Closed Open Open 2F8h (COM2:) Closed Open Open Closed 3E8h (COM3:) Open Closed Closed Open 2E8h (COM4:) Open Open Closed Closed INTERRUPT SELECTION Setting J5 J6 J7 3 Closed Open Open 4 Open Closed Open 5 Open Open Closed SUPPORTED STANDARD COMMANDS Basic AT Commands +++, ‘comma’, A/ A, D, E, H, L, M, N, O, P, Q, T, V, X, Y, Z &C, &D, &F, &G, &K, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z Extended AT Commands \A, \B, \C, \G, \J, \K, \N, \O, \Q, \T, \U, \V, \X, \Y, \Z %A, %C, %E, %G Special AT Commands -C, "H, -J, +MS, "O S-Registers S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S26, S30 Note: See MHI help file for complete information. UNIDENTIFIED COMMANDS Command Default S14 Read-only S16 Read-only S21 Read-only S22 Read-only S23 Read-only S27 Read-only S31 Read-only S33 10 S37 0 Proprietary AT Command Set COMMUNICATION PROTOCOLS Type: Configuration Format: AT [cmds] Bn [cmds] Description: Selects the communication protocol for 1200bps data calls. Command Protocol B0 Modem will use ITU-T V.22 at 1200bps. B1 Modem will use Bell 212A 1200bps. B2 Modem will use V.23 at 1200/75bps. DISPLAY CHIPSET MANUFACTURER Type: Immediate Format: AT [cmds] +GMI? [cmds] Description: Displays the chipset manufacturer’s name. DISPLAY CHIPSET MODEL NAME Type: Immediate Format: AT [cmds] +GMM? [cmds] Description: Displays the model name of the modem's chipset. DISPLAY CHIPSET REVISION Type: Immediate Format: AT [cmds] +GMR? [cmds] Description: Displays the revision level of the modem's chipset. DISPLAY INFORMATION Type: Immediate Format: AT [cmds] In [cmds] Description: Displays information requested about the modem. Command Function I0 Displays product identification code. I1 Displays firmware version. I2 Tests and displays ROM checksum result. I3 Displays chipset manufacturer. I4 Displays chipset feature bitmap. Bit Value Function 0 0 Modem uses Hayes (Patent ‘302) escape sequence. 1 Modem uses TIES (+++AT [cmds]) escape sequence. 1 0 Modem does not contain V.42/MNP firmware. 1 Modem contains V.42/MNP firmware. 5, 2 00 Modem has serial interface. 01 Modem has parallel interface. 10 Modem has PCMCIA interface. 4, 3 00 Modem does not have SRAM installed. 10 Modem has 8K x 8 SRAMs installed. 11 Modem has 32K x 8 SRAMs installed. 6 0 Modem does not support Plug-N-Play. 1 Modem supports Plug-N-Play. I6 Displays country code. Value Meaning FR Modem set for France. GR Modem set for Germany. IT Modem set for Italy. JP Modem set for Japan. NT Modem set for the Netherlands. UK Modem set for Great Britain. US Modem set for the United States. DISPLAY INFORMATION (CON'T) Command Function I7 Displays board firmware version. I8 Displays firmware feature bitmap. Bit Value Function 0 0 Modem supports VoiceView. 1 Modem does not support VoiceView. 1 0 Modem supports DSVD. 1 Modem does not support DSVD. EXTENDED RESULT CODES Type: Configuration Format: AT [cmds] Wn [cmds] Description: Selects the format of the CONNECT result code. Command Function W0 CONNECT result codes to report DTE speed. W1 CONNECT result codes to report DTE speed. W2 CONNECT result codes to report DCE speed. W3 CONNECT result codes to report DTE and DCE speeds, modulation, error correction/compression.